快kuai速su動dong力li學xue停ting流liu裝zhuang置zhi與yu光guang譜pu儀yi器qi配pei合he進jin行xing快kuai速su動dong力li學xue瞬shun間jian實shi時shi記ji錄lu，或huo離li線xian分fen析xi，為wei廣guang大da的de快kuai速su動dong力li學xue研yan究jiu學xue者zhe提ti供gong了le強qiang有you力li的de武wu器qi。選xuan擇ze不bu同tong的de配pei置zhi可ke進jin行xing下xia列lie應ying用yong：

* 蛋白質折疊動力學（Protein Folding)

* 酶動力學（Enzyme Kinetice)

* 底物結合（Substrate Binding)

* 構象轉變（Conformational Changes)

* 胞內底物運輸（Substrate Transport in Vesicles)

* 第二信使研究（Second Messenger Studies)

* 快速化學反應動力學（Rapid Chemical Reaction Kinetics)

KinTek has always been aleader in building stopped-flow instruments that conserve precious samples. The all new AutoSF-120 sets a new standard for sample economy, requiring only 120 microliters of sample to flush, load and collect data, while giving with 3-4 replicate measurements.The flushing and sample loading are all done automatically. Simply pipette 120 microliters of solution into each sample cup and click "Load".

In the process of designing this new state-of-the-art instrument, we also added new noise reduction electronic circuits to improve signal:noise twofold and achieved asubmillisecond dead time. In addition we completely re-wrote the system software for data collection and analysis to give unparalleled ease of use and power.

The KinTek AutoSF is by far the best stopped-flow instrument ever built, giving you more high quality data while consuming less sample and less time.

An optional robotic autosampler increases throughput even more to afford unattended stopped-flow measurements of hundreds of samples per day.

技術參數：

1.注射器數量：3個

2.驅動方式：每一個注射器由一個步進馬達驅動

3.更小死時間：0.6毫秒（FC-08池）0.25毫秒（微量池）

4.注射流量範圍：0.01-10ml/s(取決於安裝的注射器）

5.混合比例範圍：1/1至1/100連續可調

主要特點：

1.恒溫水夾套設計

，全電腦控製操作

2.程控驅動注射器，每路樣品流量可調，不受濃度與粘度影響

3.高精度，完全可調的混合與稀釋比例

4.極短的死時間，更短為0.25毫秒

5.二路、三路
、四路流動注射停流裝置可選擇

Small sample volume: 120 µL is sufficient to flush and load a new sample and get 3-4 reproducible shots. All other instruments require 3-5 times as much sample.

Automated computer-controlledload/flush/fire cycle — simply pipet 120 µL into each sample cup and click "load".

Twofold improvement in signal/noise with new noise reduction circuits

Compact footprint: instrument and electronics combined (14 × 26.5 × 4.5 inches)

Computer optimized optical path with lower noise and background fluorescence

Automated sample loader, which can be interfaced with an optional robot.

200 µl of sample is sufficient to load and collect 6-8 good shots.

Standard 10 µl flow cell.

20 µl per shot per solution.

Hastwo fluorescence channels and one absorbance channel that can be observed and recorded simultaneously.

Under complete computer control, courtesy of the KinTek StopFlow Software.

4TRZ